HOW MUCH DOES IT COST TO REPLACE A TV CIRCUIT BOARD ?

EZ Eletric
5 min readApr 11, 2023

--

Printed circuit boards, also known as short PCBs, are designed with great care and attention to detail. Although they are usually reliable, errors can occur during the manufacturing process, causing them to be flawed.

A PCB can need to be fixed for a variety of reasons, including maintenance issues. A simple knowledge of electronic systems and how they are applied in PCB design is essential for PCB repair services.

At the most fundamental level, we all understand that there are two types of power current: alternating current (AC) and direct current (DC) (DC). The AC current takes the shape of a curve, or the sine wave, while the DC current takes the shape of a straight line.

PCB power supply design is about more than just converting between AC and DC power. There are power and signal integrity issues to consider, as well as thermal management issues that arise with high power electronics. PCBs are now used in about all electrical appliances.

Modern PCBs are less prone to errors since they are built with more advanced design systems and techniques. Copper, silkscreen, fiberglass substrate, and solder mask are all used on today’s PCBs. Modern PCBs have several layers that are needed to house complex systems, rendering PCB Repair Services a more difficult job.

Explaining PCB Repair Services

It goes far beyond the heating element when it comes to PCB repair. In most cases, chopping traces and inserting jumpers to a damaged or faulty board is necessary. It also involves drilling passive components in the board and the placement of certain glued bits.

Circuit board repair, in theory, means that a broken PCB can regain its original function by adding or adjusting those things on the printed board. As we’ll see, buying a new part is often preferable to undertaking repairs on some of the defective PCBs.

When it comes to repairing these TV boards, it’s important to remember that various boards or damages on the boards can necessitate different repair criteria. A TV board that has been burned by fire, for example, would be more difficult to repair than a computer that has been damaged by electrical short-circuiting. Right, based on the cause or type of the damage, some PCBs can be repaired while others cannot.

If a component of an electronics assembly becomes obsolete, the question of “repair or replace?” arises. Although consumer electronics engineering is improved every year, the essentials of an electronic system in many other industries must last 10 years or longer.

Also, the best PCB designs aren’t indestructible. And if they fail unexpectedly, having TV board repair done would not be overly expensive. You do not need to replace your TV or buy a new TV set.

PCB troubleshooting with quality, efficient parts can be offered by a company into electronic circuit board repair near you. The qualified technicians will restore PCBs to a like-new state.

In addition, refurbishing or restoring your PCBs will save you up to 70% on the cost of rebuilding a product from the ground up. What’s not to like about protecting the world and saving money?

Fix OR Repair While Changing A TV Circuit Board? What Does It Cost ?

When your TV Board starts acting up, you’ll have to ask oneself this question. Replacing your TV Board can be expensive and wasteful if only a single part is malfunctioning. By sourcing your TV Board to be handled by an expert electrician offering electronic circuit board repair near you, you can avoid the costs and frustrations of a Do-It-Yourself PCB repair which could easily go wrong.

If your TV had cost you less than $200, it would not make much sense to spend almost the same amount on TV repairs. It is, as experts say, that if a TV is smaller than 32 inches, it is cheaper to replace than repair. It often happens that the circuit board is not functioning well because of another issue.

The cost to fix a circuit board that keeps powering on and off could range from $200 to $350 if the HDMI port is also damaged.

If the solution for TV repair is as simple as adjusting or swapping out an audiovisual circuit board inside the set, you do not have to worry much about the costs. Depending on the type of television set you have, circuit boards could cost between $25 and $150.

What Electronics Manufacturing Firms Can Do To Help You Repair Your Product ?

Aside from PCB renovation and waste recycling, businesses may use a number of other tactics to reduce their environmental impact:

1. Emphasis ON DESIGN

Seeing a product fail unnecessarily is never enjoyable, which is why design resources and manufacturing costs should be prioritized during the design process.

When it comes to fixing or removing components, relying on a contractor offering electronic circuit board repair near you with a design team can help you from repeating the same mistake twice.

You don’t deserve to have to deal with the same problem again if a part fails once.

2. Set A Plan

Unanticipated blips on your expenditure radar, whether that’s a flat tire on your vehicle or broken PCBs, are frightening. You will keep the finances on track by predicting obsolescence and other problems early on.

Create space in your budget for maintenance and recycling so that your earnings aren’t wasted. In an ideal world, our gadgets will last indefinitely, but we all know that isn’t the case. Staying ahead of the game requires being organized and ready for the inevitable.

3. Partner With The Right People

When it comes to sourcing electronics components and PCB production, whom do you deal with? Make sure you’re dealing with respectable businesses that won’t sell you pieces that are outdated — fake — badly made.

From mass production control to existing technologies, a good partner offering electronic circuit board repair near you can become an extension of your business. All the better if they are using top-notch third-party product management tools. The contractor will easily keep you aware of component manufacturer adjustments or last-minute purchase opportunities using this app.

Enjoy Total Customer Satisfaction With EZ Eletric

EZ Eletric exists to support you by listening to your needs and acting quickly to address those concerns through personal involvement, high-quality repairs, rigorous testing, and direct collaboration.

Serving others is a pleasure for us, and we will always put our customers’ needs first. We accomplish this by offering the best solutions for restoring damaged circuit boards to increased performance by providing a high standard and value.

We achieve 100% customer satisfaction by hiring brilliant teams who are dedicated to making a meaningful difference through world-class customer service, effective operations, cutting-edge innovation, and quality improvement in all areas of our company.

Teamwork is widely regarded at EZ Eletric. We recognize that when we all work together, we will better serve our customers, and you can see the benefits of our collaboration from the first time you communicate with us. Our motivation to save your money, coupled with our passion for helping people, is evident in the way we deliver solutions. You shouldn’t have to choose between consistency, price, and turnaround time, in our opinion. Simply put, we don’t sell something that we wouldn’t buy ourselves.

Connect with EZ Eletric for TV and circuit board repairs!

Source: How Much Does It Cost To Replace A Tv Circuit Board ?

--

--

EZ Eletric
0 Followers

EZ Eletric is a leading electrical services company in California that offers all kinds of solutions for repairs, installations, electrical system enhancements.